Ranger PX Remote Programming Procedure 2011, 2012, 2013, 2014, 2015

If you own a Ford Ranger PX from 2011 to 2015 and need to program a new remote, you can do it yourself with a few simple steps. Here is a step-by-step guide to help you through the process:

Steps for Programming Your Ford Ranger PX Remote

1. Open the driver's door: Ensure that the driver's door is open before you begin the programming process.

2. Lock and Unlock doors using the switch in the center console:

   • Use the door lock switch located in the center console to lock and then unlock all the doors.
   • Make sure all doors are unlocked before proceeding.

3. Switch Ignition ON and back to the OFF position quickly 3 times:

   • Insert your key into the ignition.
   • Turn the ignition to the "ON" position and then back to the "OFF" position.
   • Repeat this cycle quickly three times, finishing with the key in the "OFF" position.
   • Leave the key in the ignition.

4. Close and open the driver's door 3 times:

   • Close the driver's door and then open it.
   • Repeat this two more times.
   • On the third time, leave the door open.
   • You should hear all doors lock and unlock, indicating that you have entered programming mode.
   • You now have twenty seconds to complete the next steps.

5. Press the lock button twice on the remote key in the ignition:

   • Press the lock button twice on the remote key that is in the ignition.
   • The door locks should respond by locking and unlocking.

6. Press the lock button twice on any new remote:

   • Press the lock button twice on any additional remote you wish to program.
   • The door locks should respond each time you do this.

7. Remove the key from the ignition:

   • Once all desired remotes are programmed, remove the key from the ignition.
   • This action ends the programming session.

8. If it did not work:

   • If the programming did not work, check the part number of the keys to ensure compatibility.
   • Wait two minutes before restarting the procedure from the beginning.

By following these steps, you can easily program new remote keys for your Ford Ranger PX. This DIY procedure saves you time and the hassle of visiting a dealership. If you run into any issues, double-check the steps or refer to your vehicle's manual for further assistance. Enjoy the convenience of your newly programmed remotes!