🔑 Subaru BRZ Remote Programming (Manual Procedure)
This guide explains manual remote (keyless entry) programming for Subaru BRZ models from 2013 onwards.
⚠️ Important
This procedure programs remote locking functions only (lock / unlock).
It does NOT program immobiliser transponder chips, proximity keys, or push-to-start systems.
If your Subaru BRZ won’t enter programming mode, or diagnostic programming immediately returns FAILED, professional key programming may be required.
👉 Subaru BRZ key & remote programming – Gold Coast
https://needcarkeys.com.au/subaru-brz-key-programming-gold-coast/
Before You Start (Critical Subaru Note)
Many Subaru BRZ models:
- Do NOT support diagnostic remote programming
- Will return FAILED immediately if attempted with scan tools
- Require manual registration using under-dash connectors
If the required connectors are missing, damaged, or inaccessible, this procedure will not work.
Subaru BRZ 2013–Current
🔐 Remote Programming (Manual Registration Connector Method)
Remote Registration Connectors (Important)
The remote registration connectors are located:
- Under the driver-side kick panel
- Near the accelerator pedal
- Two white connectors that must be plugged into each other
⚠️ These connectors must be connected before programming can begin.
Manual Remote Programming Procedure
(Maximum 3 remotes)
This procedure uses the central locking switch on the driver’s door.
- Ensure the registration connectors are connected
- Sit in the vehicle with doors closed
- Press and HOLD the central locking switch in the LOCK position
- Interior light will flash
- An audible sound may be heard
- This confirms remote registration mode
- Press UNLOCK, then LOCK on the first remote
- Doors should lock/unlock to confirm success
- Repeat Step 4 for any additional remotes
- When finished, disconnect the registration connectors
- Test all remotes
🔁 If Step 3 fails when holding LOCK, try holding the switch in the UNLOCK position instead.
⚠️ Common Reasons Subaru BRZ Remote Programming Fails
Even when followed correctly, programming may fail due to:
- Registration connectors not connected
- Incorrect remote frequency or part number
- Aftermarket alarm or immobiliser interference
- Immobiliser faults (separate from remote locking)
- Vehicle not supporting remote pairing
If manual programming fails, diagnostic key or immobiliser programming may be required.
Can a Locksmith Help If This Doesn’t Work?
Yes.
If your Subaru BRZ:
- won’t enter registration mode
- rejects the remote
- requires immobiliser or transponder key programming
- or you’ve lost all keys
a mobile automotive locksmith can help (model dependent).
👉 Subaru BRZ key & remote programming – Gold Coast
https://needcarkeys.com.au/subaru-brz-key-programming-gold-coast/
Was This Guide Helpful? ⭐
If this Subaru BRZ remote programming guide helped you avoid a dealership visit, we’d really appreciate your support.
👉 Leave a review for Need Car Keys – Gold Coast
https://g.page/carkeysgoldcoast
Need Help or It Didn’t Work? 🚗
We provide on-site Subaru BRZ key programming and replacement across:
- Gold Coast
- Northern NSW
- 📍 Mobile service — no towing required
📞 Call or text Mike on 0494 149 841